Docs

Wiring

Raspberry Pi

Congratulations on getting this far! This is the final section where we will wire everything up and see your OSES come to life. For these steps it helps a lot to have some basic wiring tools, like wire strippers, tweezers and a soldering stand.

Power Wiring

Prep the terminals on your pi:

Cut 4 wires for power:

power to pi: 70mm
Power from pi to hub: 50mm

Wire power to your pi.

2 wires for usb data. Cut both at 52mm

Wire USB

Clean up all 3 usb ports we removed and prepare them for wiring.

Pi Wiring

Wire your pi to power on the BMS and connect to the USB input as seen in this wiring diagram.

Mounting The Pi

Plug the HDMI connector before mounting your pi. Then screw your pi down with 3 M2 screws.

BACK - Components

NEXT - Audio