Lets Get
Started
Welcome! Here we will go over what you will you need to get started building OSES. You will need basic tools and soldering equipment.
Prefer to work offline?
Download PDFTools Required
- Allen key set
- Soldering iron
- Drill & drill bits
- Hacksaw
- Deburring tool
- Flathead screwdriver
- 3D printer
- Tweezers
- Patience
Components
| Part | qty | Spec |
|---|---|---|
| BMS Board | 1 | |
| 3.7v Battery | 1 | |
| BMS Board | 1 | |
| 90 degree USB | 1 | |
| Mini sound amp | 1 | |
| LCD Screen | 1 | |
| HDMI | 1 | option: 7, 4, 8 |
| Breakout board | 1 | 1mm pitch |
| Ribbon cable | 1 | 1mm pitch, 10cm length |
| Speaker | 2 | 20mm |
| Battery capacity indicator | 1 | |
| USB hub | 1 | |
| Potentiometer | 1 | 10k ohm |
| Raspberry pi zero w 2 | 1 | |
| SPST Micro Tactile Switch | 10 | 0.7mm |
| SPST Right-Angle Micro Tactile Switch | 4 | 1.4mm |
| SPST Right-Angle Micro Tactile Switch | 1 | 6mm |
| SPST Micro Tactile Switch | 2 | 1.4mm |
Hardware
| Part | qty |
|---|---|
| M3x12 | 5 |
| M3x15 | 2 |
| M3x8 | 2 |
| M2x4 | 17 |
| Counter sunk M3x22 | 4 |
| M2 Threaded insert | 7 |
| M3 Threaded insert | 14 |
Consumables
- 28 AWG Electrical Wire
- Assorted shrink wrap
- Solder
- Electrical tape
- Flux
NEXT - 3D printing