Settings For
3D Printing
Download STL Files
3D Printed Parts
| Part | ID | qty |
|---|---|---|
| R Analogue Stick Mount | 1 | |
| L Analogue Stick Mount | 2 | |
| L Button Mount | 3 | |
| R Arrow Button Mount | 4 | |
| R Bumper Mount | 5 | |
| L Bumper Mount | 6 | |
| Start & Select Button Mount | 7 | |
| Main Component Mount | ||
| Component Mount Spacer | 2 | |
| Start & Select Button | 2 | |
| Volume Knob | ||
| Bumpers | 2 | |
| Front Shell | ||
| Rear Shell | ||
| Battery Inidcator Switch Mount | ||
| Analogue Stick | 2 |
Slicer Settings
- See renders below for print orientation
- Print one part at a time for best quality
- L/R are referenced, looking at the back of the handheld
- 15% infill
Parts WITH Supports
Button Mount
Button Mount
Parts Printed with NO supports
Right Analogue Stick Mount
Left Analogue Stick Mount
Right Bumper Switch Mount
Left Bumper Switch Mount
Start Button Mount
Start Button
Volume Knob
Component Mount Spacer
Bumpers
Battery Switch Mount
Analogue Stick
Main Component Mount
Rear Shell
Front shell
Front Shell
1. Open STL files: main body, screen frame and align them.
2. Delete main body and slice - save file.
3.Undo delete of main body, then delete screen frame and slice.
You will be left with files..
Print screen frame first, swap filament colour and purge manually.
Print main body, leaving screen frame on the buildplate.
Rear Shell
Same process as screen frame
Align logo to cutout in rear shell.
Delete rear shell and slice.
Undo delete, then delete logo and slice.