Welcome! Here we will go over what you will you need to get started building OSES. You will need basic tools and soldering equipment depending on the kit you went with.
| Part | qty | Spec |
|---|---|---|
| BMS Board | 1 | |
| 3.7v Battery | 1 | |
| BMS Board | 1 | |
| 90 degree USB | 1 | |
| Mini sound amp | 1 | |
| LCD Screen | 1 | |
| HDMI | 1 | option: 7, 4, 8 |
| Breakout board | 1 | 1mm pitch |
| Ribbon cable | 1 | 1mm pitch, 10cm length |
| Speaker | 2 | 20mm |
| Battery capacity indicator | 1 | |
| USB hub | 1 | |
| Potentiometer | 1 | 10k ohm |
| Raspberry pi zero w 2 | 1 | |
| SPST Micro Tactile Switch | 10 | 0.7mm |
| SPST Right-Angle Micro Tactile Switch | 4 | 1.4mm |
| SPST Right-Angle Micro Tactile Switch | 1 | 6mm |
| SPST Micro Tactile Switch | 2 | 1.4mm |
| Part | qty |
|---|---|
| M3x12 | 5 |
| M3x15 | 2 |
| M3x8 | 2 |
| M2x4 | 17 |
| Counter sunk M3x23 | 4 |